Cable Routing For Drive Bay 3 - Lenovo ThinkSystem ST50 V2 Maintenance Manual

Cable routing for drive bay 3

Read this section to learn about cable routing for the drive in bay 3.
Figure 15. Cable routing for drive bay 3
Table 13. Cable routing for drive bay 3
Cable
SATA cable 1 latch (520 mm)
1
Slim ODD, second 3.5-inch drive
2
and 2.5-inch drive power cable ( 300
mm + 210 mm + 110 mm)
Make sure to follow the "Cable routing guidelines" in
For the system-board connector locations, see
From
Bay 3 drive signal connector
Bay 3 drive power connector
"Internal cable routing" on page
"System board components" on page
To
SATA 3 connector
SATA power 1 connector
19.
18.
.
Chapter 2 Server components
23