Preparing Measurement Data For Export - Fluke SONOCHEK Operating Instructions Manual

Ultrasonic measuring device for preventative plant maintenance

Table of Contents

Measurements

Specify the emission ratio of the surface:

1. Select

2. Activate one of the two options via the check box:

"Select material:" select a material with an associated value from the list OR

"Set the emission ratio:" manually enter a value for the emission ratio.

3. Tap on the material to display the selection list and then tap on an entry in the list OR tap on

the numerical value to activate the keyboard and enter a value.

4. Confirm the input of the numerical value with "Done" and tap on "Close" twice to return to

live mode.

4.3 Preparing measurement data for export

For the data export, the recordings can be combined with photos, comments and voice memos

as .zip, as reports as .pdf or as .csv (only in the SONOLEAK app) .

1. Tap on the

2. Select "PDF" or "ZIP" or "CSV" to combine the data for export.

 The window for selecting the folder is shown (e.g. SONOLEVEL app):

SONOCHEK 09.2018

Settings and the menu item "Temperature measurement."

"Folder" icon to display the overview.

SONOCHEK

Table of Contents