Managing Software Applications (Apps) - Fluke SONOCHEK Operating Instructions Manual

SONOCHEK
5. Tap on the item "Remove SD card" in the list.
6. Confirm the subsequent message with "OK" to complete the process.
7. The status message "SD card has been removed" indicates that the disconnection process
has been carried out.
8. Remove the SD card by pressing on the card in the slot until the lock releases.
 A notification in the status bar indicates that the card has been removed and is no longer
available in the device.

3.9 Managing software applications (apps)

3.9.1 Installing and updating apps
Files for installation on the SONOCHEK can be transferred via USB interface. The applications
(apps) can be installed by using the software manager.
The following files are provided for installation or update:
License files: .lic (e.g.: Sonoleak_App_XXXXX_permanent.lic)
Software applications: .apk (e.g.: sonoleak-vX.XX.apk)
The following describes the installation (update) using the example of the SONOLEAK app:
1. Switch the SONOCHEK on.
2. Connect the device to your computer with the USB cable.
3. Open the "SONOCHEK" device on your computer with a double-click and then open the
folder 'Internal memory."
 You will be shown the following folder structure:
4. Open the folder "SONOCHEK" and place the corresponding files (.apk, .lic) in this folder that
are to be installed. The SONOCHEK can now be removed from your computer.
72
Important!
So as not to endanger the stability of the device, the installation is only
supported for apps that have been developed or approved by
PRUFTECHNIK.
Operation of the device, sensor system and apps
SONOCHEK 09.2018