Fluke SONOCHEK Operating Instructions Manual page 7

Notes
1.2.2 General Information
The following safety information must be observed:
SONOCHEK 09.2018
Injuries are possible!
An incorrect application of the SONOCHEK and its accessories may pose
a hazard to the user.
 During operation, charging and storage, protect the SONOCHEK from
unusual external heat (intense sunlight, storage in heated car, direct
vicinity to open flame or heating devices). The temperature ranges
specified in the technical must be observed.
 Immediately shut down the device and the sensors if malfunctions
indicate that they are no longer working properly or if they exhibit visible
damage.
 Do not open the SONOCHEK and the sensors. They do not contain any
device parts to be cleaned, maintained or repaired by the user.
 Modifications and changes to the device and sensor system are
prohibited.
Device damage is possible!
An incorrect use of the SONOCHEK and its accessories may lead to
damage and, in the worst case, to the destruction of the device technology.
 Only connect the SONOCHEK to the sensor system and accessories
that you have received from PRUFTECHNIK.
 The SONOCHEK and the sensor system have the protection class of
IP40 and are not waterproof. Do not submerse the device technology in
liquids.
 Also protect the SONOCHEK and the associated sensor system from
penetrating moisture, as otherwise device damage cannot be ruled out.
 Damaged equipment may reduce the quality of diagnostics and in the
worst case may falsify the quality. Handle the equipment carefully and
protect it from strong vibrations. Use the carry case to transport and
store the device technology.
 Avoid using the SONOCHEK in strong electromagnetic fields.
SONOCHEK
7