Table of Contents
Advertisement
Measurements
The camera focuses: The display turns and shows the focusing process.
The focusing has taken place and the photo-taking is triggered.
Additional camera settings:
In order to access the settings: Tap on the
(the icon shows some of the settings deviating from the standard values, e.g. automatic flash:
)
1. Select a theme.
2. Tap on the panel
The camera indicates that it is focusing, takes a photo and briefly shows the thumbnail in the
upper right corner of the screen.
All photos and videos that are created with the camera app can be found in the gallery or in the
SONOCHEK / internal memory / DCIM / camera folder.
Additional camera functions with an active SONOCHEK app
With the SONOCHEK app active, additional functionalities are available for documentation:
1. After recording the measurement data, tap on the
(images can also be added to folders.)
2. Select a view where the damaged point is easily visible on the display. If necessary, plan
several recordings that, for example, show recordings from a distance, show the rough
position in the system or close-ups, which document the details necessary for the repair.
3. Tap on the panel
SONOCHEK 09.2018
Adjust the lighting:
Default value: 0
tap value from -2 to +2 to adjust the setting
Change the flash mode (the icon in the overview always shows the active setting):
Default value: Flash is deactivated
Tap the icon in order to generally activate the automatic flash or the flash
Additional settings:
Adjust the image size:
Default value: 5 MP
Select the value 5 MP or 1.3 MP from the list to change the setting
Countdown timer:
Default value: Off
Tap the value Off to 60 seconds in order to change the settings
Switch the beep sound on or off for the countdown
(trigger) to take a photo.
(trigger) to take a photo.
icon:
icon to add images to a recording.
SONOCHEK
91
Advertisement
Table of Contents
