Table of Contents
Advertisement
Operation of the device, sensor system and apps
No.
Functions via quick access in the reading display
1
Pressing and holding the display of the spectrogram (or level profile) opens the display
for the division of the frequency ranges on the color scale.
The division of the frequency range can be personalized in two ways:
If necessary, you can reset the values to the factory settings. Press Reset to this end.
Then tap on OK to confirm the inputs.
Note: When exporting SONOLEVEL data, the personalized settings of the frequency
ranges for the color scale are also exported. In the DATAVIEWER software, the
SONOLEVEL data is then displayed according to the personalized color settings.
2
Adjustment of the numerical output of the level
3
Change the display of the level profile and spectrogram: tap on the icon on the top left
SONOCHEK 09.2018
- Tap on the numerical value and change the value as required by entering it using
the numerical keypad displayed. Confirm the entry with Done.
- Tap one of the black dots and drag it up or down to change the value as needed.
- Grid: tap the output area for a longer period of time (display up to max. 5 values)
- Value in the panel: Briefly tap the panel
SONOCHEK
55
Advertisement
Table of Contents
