Table of Contents
Advertisement
SONOCHEK
Precision locator DBS10-1
Attachment for the airborne sound sensor DBS10
Application:
Precise localization of damage points
in the nearby area (up to 15 cm)
The precision locator DBS10-1 is used for the precise detection of ultrasonic signals in the
nearby area. The attachment consists of two parts that are screwed together. In this way, the tip
can can be rotated to locate in the direction of the damaged point to be localized.
3.4.6
Connecting the sensor and plugging in accessories
Connect the sensor to the SONOCHEK via the associated cable according to the marking.
The sensor is powered via the cable and the measurement data is automatically transferred
to the SONOCHEK.
The sensor is ready for operation once the LED of the operating display illuminates green.
The sensor accessories are simply attached to the sensor shaft for assembly and removed for
disassembly.
44
Damage to the plug-in connectors possible!
Note the mark with the red dot, which specifies the plug-in position on the
bushing and plug.
Important!
Ensure that the accessories are firmly seated on the sensor
shaft. The ultrasound is directed to the microphone through the
attachments. Askew sensor attachments may affect the signals.
The directional characteristics of the target laser can be influenced.
Operation of the device, sensor system and apps
SONOCHEK 09.2018
Advertisement
Table of Contents
