Fluke SONOCHEK Operating Instructions Manual page 93

Measurements
The selected function is activated and the corresponding settings are available.
All photos and videos that are created with the camera app can be found in the gallery or in the
SONOCHEK / internal memory / DCIM / camera folder.
Recording screenshots
 At the same time, press the power button (left on the device) and the "quiet" button (right) on
the SONOCHEK to generate a screenshot of the current display.
 The image is shown briefly as a preview and the icon
"Screenshot is saved..." in the status bar indicate that the screenshot was saved.
All screenshots can be found in the gallery or in the SONOCHEK / internal memory / pictures /
screenshots folder.
Adding comments or voice memos
Additional information about the measurement can be added via the icons:
Create a comment:
1. Tap on the
 The input window for comments and the keyboard open.
2. Enter your comment and hide the keyboard by tapping on the
icon
3. Confirm the inputs by pressing "Save."
Create a voice memo:
1. Tap on the
 The input window for voice memos opens.
2. Tap on the
icon again to stop the recording.
3. Tap on "Save" to return to the detailed overview.
SONOCHEK 09.2018
Record videos
Text comments
Voice memo: Audio recording
Important!
If necessary, specify standards before starting the measurement regarding
the manner in which damaged points are to be documented. If data is
always available to the same extent and the same quality, this can save
time and make the evaluation and repair easier.
icon to add comments to the recording.
.
icon to add voice memos to the recording.
icon to start the recording and tap on the
as well as the text message
,
SONOCHEK
93