Fluke SONOCHEK Operating Instructions Manual page 78

SONOCHEK
4.1.4 Important device settings prior to the measurement
Switch on the SONOCHEK
1. Switch on the SONOCHEK via the On / Off button on the left side of the device: Keep the
button pressed down for a few moments.
 The startup screen and the lighting up of the left status LED (green) indicate that the
SONOCHEK is starting.
2. Move the key symbol
 The device is unlocked and displays the following menu for the initial start-up:
(For additional starts, see the next display figure)
 Tap on the "English" device language to adjust the language settings for the SONOCHEK.
3. Select a language from the list.
 The list is closed and the menu for the initial start-up is shown again.
4. Tap on the time data in the view to update it.
5. Store the date, time, time zone, time format as well as the date format and confirm the inputs
with "Done" if necessary.
 The submenu is closed and the menu for the initial start-up is shown again so the inputs can
be reviewed.
6. Confirm your inputs by tapping on the icon
78
Device damage is possible!
Incorrect use may damage the device display.
Do not use any scratching or sharp objects to operate the device via the
touch display. Standard pens are suitable for operating touch displays.
to the side on the touch screen.
.
Measurements
SONOCHEK 09.2018