Table of Contents
Advertisement
SONOCHEK
Adjusting the level profile
The level profile always shows the level that is stored in the field of the reading output marked in
green. The assignment is adapted depending on the activated grid.
This is the current level as per the factory setting (see figure).
The output can be adjusted in the live and replay mode.
To adjust the display of the level:
In the grid, tap on the panel marked in green and select the level that is to be displayed.
The application changes to the display of the level profile and shows the temporal course of
the chosen level and the associated value in the corresponding panel.
4.1.7
Select the procedure for signals making audible
The device moves the ultrasonic signals into the frequency range that is audible for the user.
The output can occur via the headphones as well as via the integrated speaker.
84
Important!
The type of making audible affects the output via headphones or speaker
depending on the audio setting chosen. The signal is only available for the
evaluation as it was recorded.
Measurements
SONOCHEK 09.2018
Advertisement
Table of Contents
