Overview of the SONOCHEK System
2.8 Case lock
The case can be locked using the enclosed TSA combination lock. The factory-set combination
is "000". Change this combination prior to first use.
Opening the TSA lock
1. Set the correct combination.
2. Move the shackle into the large opening.
3. Pull out the bracket.
Changing the combination
1. Set the current combination (Factory setting: "0 0 0 ").
2. Push in the adjusting screw using a suitable flathead screwdriver.
3. Turn the adjusting screw 90° counterclockwise.
4. Set a new combination.
5. Return the adjusting screw into the original position.
SONOCHEK 09.2018
SONOCHEK
25