Fluke SONOCHEK Operating Instructions Manual page 28

SONOCHEK
3.1.3 Connect the sensor
 Connect the sensor appropriate to the measurement task to SONOCHEK using the cable
supplied.
 The sensor is powered via the cable and the measurement data is automatically transferred
to the SONOCHEK.
 The sensor is ready for operation when the status LED on the sensor lights up green.
Observe the corresponding sensor description for the assembly of accessories.
28
Important!
For safety reasons, the carrying strap is equipped with two pushbuttons
that release under heavy tensile loads.
Damage to the plug-in connectors possible!
Note the mark with the red dot, which specifies the plug-in position on the
bushing and plug.
Important!
The sensor is powered via the SONOCHEK. Please note that there is an
increased power demand in the event of an intensive use of the laser or
flashlight.
Operation of the device, sensor system and apps
SONOCHEK 09.2018