Fluke SONOCHEK Operating Instructions Manual page 90

SONOCHEK
3. Tap on the icon again or press the button on the sensor to end the measurement early or
wait for the measurement schedule to end (10 seconds as per factory setting for the
SONOLEVEL, 1 second for SONOLEAK).
 The application opens the window for the measurement details.
4.2.3 Documentation of measurement points
The following options are available in SONOCHEK for the documentation of measuring points:

Photos

Videos

Comments or voice memos
Documenting measuring points is possible directly after the measurement. Subsequent changes
are possible in the folder overview of the SONOLEVEL and SONOLEAK apps (see 3.6.4
Displays and control elements in the folder overview, 3.6.5 Editing the folder details, 3.7.4
Displays and control elements in the folder overview).
Taking photographs with the camera app
The SONOCHEK has a camera to document measurement points. Photos can be assigned to
the SONOCHEK app folders or individual measurements. Damaged points can be marked on
the pictures.
Please note that the functional scope of the camera app is different from the camera
functionality with the activated SONOCHEK app.
To start the camera app:
 Move the startup screen to the left side to start the camera app
 The camera opens and the camera's basic functions are available.
Available features:
Zoom
Place two fingers on the display and spread them or move them together to select the desired
section in the view. The zoom level is shown during the adjustment and then is hidden for the
photograph.
Autofocus
The autofocus is automatically active when starting the app and is shown when taking the
photo:
90
Important!
The control elements in the lower display area ("Back," "Home,"
and "Active applications") are hidden to operate the camera. Tap on the
bar to overlay.
Measurements
via the quick access.
SONOCHEK 09.2018