Installing The Optiview Wireless Network Analyzer Software; Moving The Software To Your Optiview Integrated Network Analyzer - Fluke OptiView Getting Started Manual

TM
OptiView
Getting Started Guide
Installing the OptiView Wireless Network Analyzer
Software
If the OptiView Wireless Network Analyzer icon does not appear on your
OptiView Series II Integrated Network Analyzer desktop, you will need to install
the software. There are three steps involved in the installation:
•
Move the self-extracting software file onto the Analyzer's hard disk
•
Install the software on the Analyzer
•
Installing the Wireless LAN Adapter card
The OptiView Wireless Network Analyzer software must be installed
BEFORE installing the 802.11a/b/g Wireless LAN Card.
Older OptiView Integrated Network Analyzers (running Win98) must
be running with OptiView software version 3.52 or greater. All
newer OptiView Series II Analyzers work with the OptiView Wireless
Network Analyzer application.

Moving the Software to Your OptiView Integrated Network Analyzer

There are three methods for moving the software file:
•
Copy the file from your OptiView Wireless Network Analyzer CD to your
analyzer using an external USB CD-ROM drive
•
Copy the file from your OptiView Wireless Network Analyzer CD to your
PC, and then transfer the file to the Analyzer using one of the methods
listed below:
•
•
•
Download the software file from the Fluke Networks Web Site directly to
the Analyzer
Once the software file is on your Analyzer, you will need to install it as described
in Installing the Software on the Analyzer.
4
Use a direct point-to-point connection
From the Analyzer, use Microsoft Networking to map a drive on the
PC, and copy the file to the Analyzer (analyzer and PC must be in
same subnet)
•
Transfer the software file to the Analyzer Using the Analyzer's
TFTP Server software
Note