PVT SYSTEM
7. Remove the E-clips
y
rollers
. Inspect the rollers for wear; replace if worn.
8. Press out the spring pins
9. Pull out the clutch slider pins
5.28
r
t
, washers
, and the clutch
u
in the inner sheave.
i
o
and sliders
.
10. Separate the stationary sheave from the moveable
sheave. Note the X's
sheaves for reassembly.
11. Inspect the clutch bushings for wear. If there is heavy
wear on the bushings, replace the clutch assembly.
12. Inspect the sheaves for excessive wear or damage.
CLUTCH INSPECTION
1. Clean the sheaves and inspect each of them for
damage.
If either clutch sheave is damaged, the entire driven
clutch assembly must be replaced.
2. Inspect the compression spring for cracks or other
damage.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
a
on the stationary and fixed
NOTICE
© Copyright Polaris Industries Inc.