ENGINE / COOLING / HVAC SYSTEM
HVAC MAINTENANCE
COMPRESSOR DRIVE BELT INSPECTION
1. Position the vehicle on a level surface, place the
transmission in PARK and stop the engine.
2. Tilt the rear cargo box to the upright position.
3. Remove the fasteners holding the alternator cover to
the vehicle.
4. Inspect the drive belt for cracks, damage, wear,
separation or oil. Check for debris or buildup in the
drive belt splines. If any of these conditions exist,
replace the belt.
NOTICE
ALWAYS use the specified drive belt. Using a non-
specified belt can shorten the belt life.
3.124
A/C CONDENSER CLEANING
1. Position the vehicle on a level surface, place the
transmission in PARK and stop the engine.
2. Turn the two fasteners counterclockwise 1/4 turn and
remove the grass screen.
3. Carefully use low pressure air or water to clean the
condenser cooling fins.
4. Reinstall the grass screen and turn the two 1/4 turn
fasteners clockwise.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.