Polaris RANGER XP 900 2018-2019 Service Manual page 361

y
9. Install retaining ring with sharp, square edge facing
away from U-joint into exposed groove.
u
10. Place larger adapter with ID larger than yoke bore
on side with retaining ring.
11. Tighten clamp until other cap is below retaining ring
groove.
12. Install second retaining ring
edge facing away from U-joint.
13. Verify the U-joint moves freely and does not bind.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
i
with sharp, square
FINAL DRIVE
7
7.13