ENGINE / COOLING / HVAC SYSTEM
ALTERNATOR REPLACEMENT
1. Disconnect the negative (-) battery cable before
servicing the electrical system.
2. Remove the compressor drive belt. Refer to
"Compressor Drive Belt Replacement"page 3.127
procedure.
3. Disconnect the wire harness connector and power
cable from the alternator.
4. Remove the alternator mounting fasteners.
5. For installation, reverse removal procedure.
6. Torque the alternator fasteners to specification in the
sequence as shown.
TORQUE
Alternator Mounting Fasteners:
37 lb-ft (50 Nm)
3.132
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.