Polaris RANGER XP 900 2018-2019 Service Manual page 112

ENGINE / COOLING / HVAC SYSTEM
3. Remove the remaining two bolts that retain the front
e
camshaft carrier and carefully lift the carrier off the
camshafts.
4. Hold camshafts with an open-end wrench. Remove
r
the top bolts from the camshaft sprockets.
5. Rotate the engine to allow access to the remaining
bolt on each camshaft sprocket.
6. Remove two fasteners
tensioner from the cylinder. Use a new tensioner
gasket upon assembly.
7. Remove the remaining bolts
sprocket
3.32
t
and the cam chain
r
from each camshaft
8. Lift the chain and sprockets off the camshafts to
allow each sprocket to be removed.
9. Using a paperclip or other tool, hold cam chain up.
The crankcase has a built-in lower guide to prevent the
chain from falling off the crankshaft.
10. Evenly loosen the four bolts retaining each rear
y
camshaft carrier
the camshafts.
11. Mark the intake
ensure proper assembly.
12. Carefully remove camshafts from the cylinder head.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
NOTICE
and carefully lift the carriers off
i u
and exhaust camshafts to
© Copyright Polaris Industries Inc.