Rear Floor - Crew - Polaris RANGER XP 900 2018-2019 Service Manual

BODY / FRAME
9. Remove two T-40 Torx-head screws (X) holding the
front floor to the frame.
10. Remove fasteners retaining the front floor to the front
fenders and cab frame mounts.
11. Remove the front floor from the vehicle.
10.34

REAR FLOOR - CREW

1. Remove both rear rocker panels. Refer to "Rocker
Panel Removal - CREW"page 10.32 procedure.
2. Remove both front rocker panels. Refer to "Rocker
Panel Removal"page 10.31 procedure.
3. Remove the battery.
4. Remove four T-25 Torx fasteners (A) Fig. 1 securing
the fuse box to the center under seat storage box.
5. Remove four T-25 Torx fasteners (B) Fig. 1 securing
the Electronic Control Unit (ECU) to the seat storage
box.
6. Remove the diagnostic connector (C) Fig. 1 from the
protective cover.
7. Remove the four T-40 Torx fasteners from the center
under seat storage box.
8. Remove the wire harness grommet (D) Fig. 1 to
separate the fuse box, ECU and diagnostic connector
wire harness from the storage box.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.