Oil Pressure Test - Polaris RANGER XP 900 2018-2019 Service Manual

OIL PRESSURE TEST

1. Attach the Oil Pressure Gauge Adapter (PU-52492)
to the Oil Pressure Gauge (PV-43531).
Oil Pressure Gauge: PV-43531
Oil Pressure Gauge Adapter: PU-52492
2. Raise the dropbox to access the engine.
3. Clean the area around the oil gallery plug
in the upper crankcase on the MAG side of the engine
4. Remove the crankcase gallery plug and thread in the
oil pressure adapter.
specification.
TORQUE
PU-52492: 22 ft-lbs (30 Nm)
5. Start engine and allow it to reach operating
temperature, monitoring gauge indication.
NOTICE
Test results are based on the use of the recommended
engine oil (Polaris PS-4 or PS-4 Extreme Duty) at
operating temperature, and may vary considerably if
any other oil is used or if engine is not up to
temperature.
Oil Pressure Specification (Engine Hot):
Minimum @ 1200 RPM: 10 PSI
Minimum @ 7000 RPM: 40 PSI
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
q
located
Torque the adapter to
ENGINE / COOLING / HVAC SYSTEM
6. Upon assembly, torque the crankcase gallery plug to
specification.
TORQUE
Crankcase Oil Gallery Plug (M20):
22 ft-lbs (30 Nm)
3
3.29