Polaris RANGER XP 900 2018-2019 Service Manual page 302

PVT SYSTEM
8. Tighten the spider jam
Socket (PU-50578). Torque jam nut to specification.
TORQUE
Spider Jamb Nut:
250 ft-lb (339 Nm) (Apply 0.1 mL Loctite® 620™)
90° apart to the threads of the spider jam nut.
9. After the spider and jamb nut have been torqued,
remove the clutch assembly from the holding fixture
and inspect the alignment marks made during
disassembly.
NOTICE
If the marks illustrated below are not in alignment upon
assembly, the clutch will not be in balance and the drive
clutch assembly must be replaced.
5.24
a
nut using Clutch Spider Nut 10. Install the limiter spacer
DO NOT reassemble the drive clutch without the limiter
spacer. Belt life will be greatly reduced.
11. Install the drive clutch cover
marts are in alignment.
12. Install cover bolts and torque in a cross pattern
evenly to specification.
Drive Clutch Cover Bolts:
8 ft-lb (11 Nm)
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
s
and the clutch spring
CAUTION
f
. Be sure all alignment
TORQUE
© Copyright Polaris Industries Inc.
d
.