Re-Routing The Electrical Cord To The Left Side - Travis Industries Medium Flush Wood Hybrid Fyre Insert Manual

Fireplace Insert Installation

Re-Routing the Electrical Cord to the Left Side

The power cord is connected to the right side of the insert when it leaves the factory. It may be re-routed
to the left side following the directions below. Do this procedure before installing the surround panels.

Disconnect the Molex connector and remove the power cord following the directions below.

Connect the power cord to the left side following the directions below.
© Travis Industries
(for qualified installers only)
4/27/2021 - 1496
15
Med Flush Wood Insert