Door Parts; Replacing The Glass; Replacing The Door Gasket - Travis Industries Medium Flush Wood Hybrid Fyre Insert Manual

32

Door Parts

ID # Description
1 Gasket Cement, 4 oz.
3 (4) Clips w Screws, Gaskets - Rect
(4) Clips w Screws, Gaskets - Arched
5 Glass (w Gasket) – Rectangle
7 Handle Assembly
9 Glass (w Gasket) – Arched

Replacing the Glass

The glass must not contact the door retainer or glass clips directly. The glass gasket and glass clip
gaskets insulate the glass to prevent cracking. Do not over-tighten the glass clips. Use only 5mm thick
neo-ceramic glass.
Lay the glass gasket in the door frame (cut off excess gasket). Place the glass on the gasket. Secure
the glass clips to hold the glass in place (make sure the glass clip gaskets are in place).

Replacing the Door Gasket

The door gasket inserts into the outer groove of the door retainer. Stove gasket cement holds it in place.
Before installing, remove any residual cement. Lay the gasket in place (start at the lower left corner) and
cut off any excess gasket (do not stretch the gasket. The cement fully cures with heat from the stove.
You may need to open and close the door repeatedly to get the gasket to seat fully.
© Travis Industries
Maintaining Your Appliance
Qty. Part #
1 99900427
1 250-02191
1 250-02193
1 250-02183
1 250-02196
1 250-02195
4/27/2021 - 1496
ID # Description
2 Door Gasket, 3/8" x 80"
4 (2) Clip Gaskets
6 Glass Gasket (1/4" X 76")
8 Wood Handle w Screw
Qty. Part #
1 99900429
1 250-02194
1 250-02184
1 250-01305
Med Flush Wood Insert