Cleaning The Catalytic Combustor - Travis Industries Medium Flush Wood Hybrid Fyre Insert Manual

Cleaning the Catalytic Combustor

NOTE: Use an ash vacuum with brush attachment to clean the catalytic combustor.
1. With the stove fully cooled, insert the ash vacuum nozzle into the area directly above the door
opening.
2. Carefully place the brush surface of the nozzle over the catalytic combustor openings and remove
any ash or debris. Take care to prevent damage to the catalytic combustor (the surface is fragile).
© Travis Industries
Maintaining Your Appliance
4/27/2021 - 1496
31
Med Flush Wood Insert