Setup Of The Simatic Mv500 - Siemens SIMATIC MV500 Operating Instructions Manual

Configuration backup
Allows automatic saving of complete device configuration on micro SD card (not included in
scope of delivery).
1.3

Setup of the SIMATIC MV500

The following figure shows an example of the setup of the optical reader using a SIMATIC
MV550.
①
②
③
④
Please note that the MV540 optical readers do not have a 2nd Ethernet interface.
1)
Figure 1-1
SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05
LED display
Protective lens barrel
Built-in ring light
Combination interface for
power supply, DI/DQ, RS232 and CM (M12,
12-pin)
Setup of the SIMATIC MV550
1.3 Setup of the SIMATIC MV500
⑤ Ethernet interface X2 LAN2
(M12, 8-pin)
10/100/1000 Mbps
⑥ Ethernet interface X1 LAN1
Power over Ethernet (M12, 4-pin)
10/100 Mbps
⑦ Nameplate
Description
1)
21