Siemens SIMATIC MV500 Operating Instructions Manual page 104

Mounting
5.1 Notes on installation
Selecting components and mounting the optical reader
The optical readers are autonomous compact devices that need to be mounted in a suitable
location and only require a lens, a power supply cable and a communications connection. The
SIMATIC MV500 optical reader has threaded holes on the front and back, allowing flexible
mounting options.
To provide lighting when reading the codes, you have several options available. The simplest
and most space-saving option is a ring light that can be integrated in the protective lens
barrel.
You also have the choice between the different lens types. You can use mini/FF lenses with
fixed focal length and adjustable aperture/focus and EF lenses with adjustable focal length.
The following describes mounting based on the ring light or lens used.
NOTICE
Compatibility of MV500 built-in ring light and MV440 protective lens barrel
Note that you may only use the MV500 built-in ring lights in conjunction with the
SIMATIC MV500 optical readers and the protective lens barrel (article number 6GF3540-
8AC11).
The protective lens barrels of the SIMATIC MV440 readers are not compatible with the
SIMATIC MV500 readers in conjunction with the SIMATIC MV500 built-in ring light.
Selecting the components
It is important to select the appropriate components to suit the ambient conditions in which
your optical reader is operated and the associated requirements of your reading
environment. You can find more detailed information on this in section "Selection of suitable
components (Page 275)".
104
Operating Instructions, 03/2021, C79000-G8976-C494-05
SIMATIC MV500