System Configuration With External Ring Light; Other System Extensions - Siemens SIMATIC MV500 Operating Instructions Manual

Network and system integration

4.9 System configuration with external ring light

System properties - HTML browser
• Visualization takes place via an HTML browser (e.g. Microsoft Internet Explorer) on a
PC/PG, Panel PC or similar device.
• The optical reader can be monitored via the live image of the diagnostic pages, without
the need for a Java VM on the PC/PG.
• A PC/programming device is connected via Ethernet to allow adjustment of the device.
You can find additional information about visualization with an HTML browser in the WBM
online help.
4.9 System configuration with external ring light
The external ring lights do not require an additional power supply unit for the power supply.
Power is supplied via the S7 controller using a corresponding adapter cable.
An external ring light can be controlled via the stroboscope signal of the optical reader. In this
case, the ring light must be supplied with power by an external power supply.
4.10

Other system extensions

System integration via Ethernet/IP connection
System integration via Ethernet/IP connection is possible with the RFID 181EIP
communication module.
102
Operating Instructions, 03/2021, C79000-G8976-C494-05
SIMATIC MV500