Siemens SIMATIC MV500 Operating Instructions Manual page 135

Step 4: Start Web Based Management (WBM)
Follow the steps below to start the WBM:
1. Start your Web browser.
2. Enter the IP address of the reader in the address bar of your browser.
3. Confirm your entry by pressing the <Enter> key.
Reaction: The upstream setup page of the WBM opens.
4. Click "Start page".
Reaction: The WBM of the reader opens.
Figure 7-1
Result
You are connected to the reader and the reader can be operated via the WBM. Below, you can
perform the next steps to configure the reader and see initial read results.
SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05
The homepage of the WBM
7.4 Connecting and setting up the reader
Commissioning
135