Turning On/Off - Bosch VideoJet 8008 Installation And Operating Manual

EN | 22

Turning on/off

Mains connection
A mains cable with connector is supplied with the VideoJet 8008 package. The
VideoJet 8008 does not have a power switch. Once you have connected the unit
to the power supply and it has booted, it is ready to use.
Warning!
Use suitable equipment where necessary to ensure that the mains supply
is free of interference such as voltage surges, spikes or voltage drops.
Warning!
Connect the VideoJet 8008 to the mains supply only after everything else
has been hooked up.
– Plug the connector on the mains cable into the Power socket.
– Connect the mains cable to a fused mains socket. The green Power LED on
the front panel of the VideoJet 8008 lights up. After the boot process, as soon
as the text VideoJet 8008 appears in the display the unit is ready to use.
If the network connection has been made correctly, the green LED for the RJ45
jack 10/100/1000 MBit Base-T on the rear panel of the unit should be lit. The
flashing orange LED indicates data traffic on the network.
Installation
Installation and Operating Manual | VideoJet 8008
Bosch Security Systems | 2005-06 | V2.0