Bosch VideoJet 8008 Installation And Operating Manual page 117

EN | 117
VideoJet 8008 | Installation and Operating Manual
Input pin states
Shows the alarm inputs at which an alarm is currently available (indicated by H).
EthTX
EthRX
Current data transmission rate from and to the VideoJet 8008.
HDD Throughput
Current recording speed to the VideoJet 8008 hard disk.
SW version
Firmware version number for VideoJet 8008.
HW version
Hardware version number for VideoJet 8008.
HDD Capacity
Current free memory space on the hard disk.
COM1
Information about the serial interface (standard, interface parameters).
Fan 1
Fan 2
Information about the status of the two fans on the rear of the unit.
Date
Time
Information about the date and time setting.
System uptime
Unit operating time since last being turned on or since the last reset (in days,
hours, minutes and seconds).
Encoder status
Indicates the encoders that are functioning correctly (indicated by +).
Bosch Security Systems | 2005-06 | V2.0 Operation