Bosch VideoJet 8008 Installation And Operating Manual page 66

EN | 66
MPEG-4 encoder
For encoding the video signal, you can select two profiles for each camera and
change the presets for the profiles.
Selecting a profile
You can adapt the MPEG 4 data transmission to the operating environment (for
example network structure, bandwidth, data structures). The VideoJet 8008
provides Dual Streaming for each of the eight encoders. The advantage of this
is that each encoder can simultaneously generate two data streams with
different compression settings, for example for transmission and local storage.
Note
The settings must be made individually for each camera input and each
stream. The numbering corresponds to the labeling of the video inputs on
the rear panel of the unit.
Pre-programmed profiles are available, which each give priority to different
perspectives.
Profile 1: Low bandwidth (CIF)
High quality for low bandwidth connections,
resolution 352 × 288/240 pixels
Profile 2: Low delay (1/2 D1)
High quality with low delay,
resolution 352 × 576/480 pixels
Profile 3: High resolution (D1/4CIF)
High resolution for high bandwidth connections,
resolution 704 × 576/480 pixels
Configuration using a Web Browser
Installation and Operating Manual | VideoJet 8008
Bosch Security Systems | 2005-06 | V2.0