Bosch VideoJet 8008 Installation And Operating Manual page 74

EN | 74
– Go to the last screen of the Wizard if necessary.
– Click Finish to finalize the configuration. All settings will be transmitted to the
VideoJet 8008 and are in effect afterward.
Editing a partition
The configuration of a partition can be changed at any time.
Warning!
Making changes to a partition causes the affected partition to be
reorganized and all sequences stored on it to be lost.
Changes to the size (total space in partition) will result in reorganization of
the entire hard disk and the loss of all saved data.
You should therefore back up all important sequences to the computer's
hard drive before making changes to the partition.
The desired changes can be made in the Edit partition window.
– Click to select the partition in the list that you want to change.
– Click Edit partition. A new window is opened containing information about
the selected partition.
– Make the desired changes.
– Click Set to save the changes.
– After closing the window, click the Set button in the main window to send the
changes to the unit and save them there.
Deleting partitions
A partition can be deleted at any time.
Warning!
Deleting a partition causes the entire hard disk to be reorganized and all
sequences stored on it to be lost. Therefore, before deleting partitions,
check the recordings and back up the important sequences to your
computer's hard drive.
– Click a partition in the list to select it.
Configuration using a Web Browser
Installation and Operating Manual | VideoJet 8008
Bosch Security Systems | 2005-06 | V2.0