Bosch VideoJet 8008 Installation And Operating Manual page 50

EN | 50
Video loss alarm:
Click the check box if you want interruption of the video signal to trigger an
alarm. A selected video input is marked with a tick.
Note
The numbering corresponds to the labeling of the video inputs on the rear
panel of the unit.
Alarm connections
You can select the response of the VideoJet 8008 in case of an alarm. In case of
an alarm, the VideoJet 8008 can automatically establish a connection to a
predefined IP address. You can enter up to ten IP addresses which will be
selected in order by the unit in case of an alarm until a connection is established.
You can also choose which camera image should automatically be displayed
first on the receiver in case of an alarm.
Connect on alarm:
Select On so that the VideoJet 8008 automatically establishes a connection to
a pre-defined IP address in the event of an alarm.
Configuration using a Web Browser
Installation and Operating Manual | VideoJet 8008
Bosch Security Systems | 2005-06 | V2.0