Bosch VideoJet 8008 Installation And Operating Manual page 28

EN | 28
– Follow the on-screen instructions.
Establishing the connection
The VideoJet 8008 must be assigned a valid IP address to operate on your
network.
The following default address has been pre-set at the factory: 192.168.0.1
– Start the web browser.
– Enter the IP address of the VideoJet 8008 as the URL. The connection will be
established and, after a short time, the LIVEPAGE with the video image will
appear.
Note
If the connection is not established, the maximum number of possible
connections may already have been reached. The maximum number of
connections depends on the device and network configuration.
Configuration using a Web Browser
Installation and Operating Manual | VideoJet 8008
Bosch Security Systems | 2005-06 | V2.0