Bosch VideoJet 8008 Installation And Operating Manual page 43

VideoJet 8008 | Installation and Operating Manual
Warning!
Making changes to a partition causes the affected partition to be
reorganized and all sequences stored on it to be lost.
Changes to the size (total space in partition) will result in reorganization of
the entire hard disk and the loss of all saved data.
You should therefore back up all important sequences to the computer's
hard drive before making such changes.
Partition name:
You can enter a new name for the partition here.
Video input:
Shows information about the number of the associated video input. The
numbering corresponds to the labeling of the video inputs on the rear panel of
the unit.
Type of recording:
Select the desired type of recording here.
In Ring mode, recording will continue indefinitely. When the maximum hard disk
space has been reached, the oldest recordings will be overwritten automatically.
In Linear mode, recording will continue until all the disk space has been used.
Then recording will be stopped until some old recordings are deleted to provide
free space.
Video recording:
The recording format is displayed here for your information.
Recording profile:
For recording always Stream 2 is used. Select here the profile desired to be
active while recording is in progress. You can view and modify the parameters
for the profiles (see Encoder settings from page 32).
Note
The recording profile can be different from the standard settings Active
profile for Stream 2 and is only used while recording is in progress.
Bosch Security Systems | 2005-06 | V2.0
EN | 43
Configuration using a Web Browser