Bosch VideoJet 8008 Installation And Operating Manual page 38

Bosch videojet 8008 installation and operating manual
Hide thumbs Also See for VideoJet 8008:
Table of Contents

Advertisement

EN | 38
Activating a partition for recording
After configuring a partition, it can be activated for recording by clicking the Start
button.
Once started, the Time recording and Alarm recording pages and the settings
for the active partition are shown in gray and the configuration cannot be
changed.
The icon at the bottom of the pages indicates recording activity on this partition.
The icon is animated while recording is in progress.
Recording activity can be stopped at any time, and one, several or all partitions
can be deactivated.
– Click Start to activate the currently selected partition for recording.
– Click Start all to activate all partitions set up for recording.
– Click Stop to deactivate the currently selected partition for recording.
Recordings in progress are interrupted and the configuration can be
changed.
– Click Stop all to deactivate all partitions set up for recording. Recordings in
progress are interrupted and the configuration can be changed.
Time recording
Here you can specify the times during which continuous recording to the hard
disk will take place.
For each partition and thus for each camera input, there are separate selection
fields for each day of the week. You can select 16 individual recording periods
for each day of the week.
Configuration using a Web Browser
Installation and Operating Manual | VideoJet 8008
Bosch Security Systems | 2005-06 | V2.0

Advertisement

Table of Contents
loading

Table of Contents