Bosch VideoJet 8008 Installation And Operating Manual page 56

EN | 56
COM1 settings
The serial interface port RS232/485 can be configured for specific requirements.
Note
If the VideoJet 8008 is working in multicast mode (see page 54), the first
remote location to establish a video connection to the unit is also assigned
the transparent data connection. However after about 15 seconds of
inactivity, the data connection is automatically terminated and another
remote location can exchange transparent data with the unit.
Serial port function:
Select a controllable device from the list. If you want to use the interface to
transmit transparent data, select Transparent. To operate the unit with a
terminal, choose Terminal.
Note
After selecting a device, the remaining parameters in the window are set
automatically and should not be changed.
Baud rate:
Select the value for the transmission rate in Bit/s.
Data bits:
The number of data bits per character cannot be changed.
Configuration using a Web Browser
Installation and Operating Manual | VideoJet 8008
Bosch Security Systems | 2005-06 | V2.0