Bosch VideoJet 8008 Installation And Operating Manual page 68

EN | 68
Changing profiles
You can change the name and individual parameter values within a profile. You
can switch between profiles by clicking the associated tabs.
Warning!
The profiles are rather complex. They include a number of parameters that
interact with one another. Therefore it is generally best to use the default
profiles. The profiles should only be changed if you are completely familiar
with all the configuration options.
Note
The parameters as a group constitute a profile and are dependent on one
another. If you enter a setting outside the allowed range for the parameter,
the nearest valid value will be substituted when the settings are saved.
Profile name:
You can enter a new name for the profile here. The name is then displayed in
the lists of available profiles in the MPEG-4 encoder field.
Configuration using a Web Browser
Installation and Operating Manual | VideoJet 8008
Bosch Security Systems | 2005-06 | V2.0