Table of Contents
Advertisement
Installation Guide
5.1 Installation Overview
Procedure Info
Required Tools
• Long T15 Torx Screwdriver
• # 2 Philips Screwdriver
• Long T10 Torx Screwdriver
• Tape Measure
• Level
Torque Specifications for Screws
Screw Type
M5 x 12mm T15 Flat Head Torx
screws or screw plate
M5 x 12mm Phillips Pan Head screws 3.38-3.61 Nm / 30-32 in-lbf
Low-Profile M4 x 3.2mm Philips
screws
Captive M5 Torx chassis cover thumb
screws
Cable Management
There are two different options for cable management in Ultrastar Serv60+8 : CMA Standard and CMA
Lite. Each of these options has a different installation, configuration, and purpose. The standard CMA
configuration manages and protects the full cable load during normal operation of the Ultrastar Serv60+8
. If a fully-configured Ultrastar Serv60+8 is not necessary, CMA Lite provides a better management and
protection solution for a lighter cable load, with a more compact hardware footprint. Utilizing front spacer
brackets that shift the enclosure forward, and narrower basket clips for tighter cable management, CMA
Lite allows the enclosure to fit within shallower racks and/or those with front and rear doors. The following
information provides a list of the features of each cable management option:
CMA Standard:
• Enables use of all I/O connections
• Manages and protects full set of cables during installation, operation, and servicing
• Easy cable routing with the open-top cable baskets
Required Parts
• Option 1:M5 x 12mm T15 Flat
Head Torx screws and included
washers
• Option 2: Screw plate
• M5 x 12mm Phillips Pan Head
screws (to secure top cover)
• Low-Profile M4 x 3.2mm Philips
screws (included with rail
assembly)
• 10 M5 cage nuts
• Zip Tie (from CMA box)
3.38-3.61 Nm / 30-32 in-lbf
.90-1.12 Nm / 8-10 in-lbf
3.38-3.61 Nm / 30-32 in-lbf
5.1 Installation Overview
# of People
Required
3 Total (2 for
Team Lifting
Purposes and
1 to Guide and
Spot)
Torque Value
5. Installation
Time
Required
45 min.
45
Advertisement
Table of Contents
