Table of Contents
Advertisement
Installation Guide
Figure 34: Open Baskets
c. Route all of the cables being connected to the enclosure through the open baskets.
d. Close all of the baskets.
e. If the Ultrastar Serv60+8 is being installed in a rack and will subsequently be transported
inside that rack, it is important to use the included cable tie to wrap the CMA bundle to
ensure it does not get damaged during transport. If the Ultrastar Serv60+8 is instead being
installed where it will be operated, skip this step. Remember to remove the cable ties after
the enclosure has reached its final operational location.
f. Reconnect the arm at the elbow to the connectors on the rail.
CMA Lite:
a. Press the blue latch button labeled "push" to unlatch the elbow side of the CMA arm, and
then swing the arm open.
b. Open all of the baskets.
5. Installation
5.5 Cable Installation
63
Advertisement
Table of Contents
