Installation Guide
Accessory Tray
The accessory tray contains boxes for the CMA arm, the Rails, and the Top Cover Alignment Brackets, as
well as plastic bags containing the cables and necessary hardware.
Figure 8: Accessory Tray Contents
4.1 Ultrastar Serv60+8 Packaging Overview
Table 31: Accessory Tray Contents
Container
CMA Box
1 CMA arm
Rails Box
• 2 Rails (each containing 1 inner-
rail & 1 outer-rail)
• Cross-bar
Brackets
2 Top Cover Alignment Brackets
Box
Accessory
• 2 Rack Latch Brackets (1 left, 1
Tray
right)
• Screws & Nuts
◦ 10 M5 cagenuts
◦ 30 M5 x 12, T15 Torx
screws
◦ 2 M5 x 12 Philips panhead
screws (for cover
retention)
◦ 16 custom round washers
• Cables
◦ 2 C13 to C14 power cables
(3m)
4. Packaging
Contents
39