Table of Contents
Advertisement
Installation Guide
Time: 10 minutes
Caution: Always install the top cover onto the enclosure before installing the chassis into a
rack. Not having the top cover installed may damage the alignment brackets.
Step 1 : Extend the mid-rails out of the rack so that they are protruding from the front of the rack and the
safety latches engage.
Figure 29: Extend Mid-Rails
Step 2 : Install the chassis into the rails.
a. Extend the bearing plates on the inside of the mid-rails until they are fully forward (detent
has engaged). This prevents potential damage due to improper mating of the rails.
5. Installation
5.3 Chassis Installation
58
Advertisement
Table of Contents
