Table of Contents
Advertisement
Installation Guide
Figure 30: Bearing Plate
b.
In preparation to perform a team lift, position one individual on each side of the enclosure
(to lift) and a third individual standing at the protruding rack rails (to guide the chassis to
mate with rack rails).
c. Team-lift the enclosure until the inner rails (which are attached to the chassis) align with the
extended mid-rails (which are attached to the rack), and guide the inner rails on the chassis
to mate with the rack rails.
Caution: This step in the installation requires a minimum of 3 individuals to
install safely, two to lift and one to guide the others who may have difficulty
seeing because the enclosure is in the way. Ensure that the appropriate
measures are taken to safely support the enclosure during installation. The
enclosure MUST have no drives installed and requires a two person team lift to
install. Do not attempt to lift the system if it is fully populated with drives.
The only case in which the system may be installed or removed with the drives
populated is if the facility has a lift that is rated to handle the maximum weight
of the fully loaded system.
5. Installation
5.3 Chassis Installation
59
Advertisement
Table of Contents
