Table of Contents
Advertisement
Installation Guide
Table 5: Performance Specifications
Specification
Number of Processors
Number of Memory Slots
Number of Drive Slots
Data Transfer Rates
Max Raw Data Storage Capacity
1.7 Ultrastar Serv60+8 Rack Requirements
The Ultrastar Serv60+8 is designed to be installed into a rack that meets the EIA-310 standard at a minimum
1200 mm (47.24in.) of usable rack space, frame to frame. The vertical rack rails must be set between
812.8mm - 914.4mm / 32 in. - 36 in. to support the enclosure. It requires 4U of rack space, and it should be
installed into the rack at the lowest possible U height to keep the load on the rack balanced.
Table 6: Required Rack Specifications
Parameter
Vertical Rack Rail Spacing
Static Load Rating
Dynamic Load Rating
Warning: When extended out of the rack on the rail system, the Ultrastar Serv60+8 will be
~950 mm / 37.4in. extended outward. This may be a potential tipping hazard depending on
the configuration of the rack. Ensure that leveling feet, anti-tilt, and any other safety features
recommended by the specific rack manufacturers have been deployed before servicing.
Mother Board
Processor Type
Socket
Chipset
Memory Type
Graphics
Server BMC Chip
Rack Depth
1200 mm (47.24in.) of usable rack space, frame to frame
450mm (17.72in.) minimum width with 465mm (18.31in.) ± 1.5mm nominal
Rack Width
hole spacing and W1 is 492mm minimum. See EIA-310 Rack Standard
Rack Units (U)
1.7 Ultrastar Serv60+8 Rack Requirements
Value
Intel Sawtooth Pass S2600ST
Intel Skylake or Cascade Lake
LGA3647-0 (Socket P) processor sockets
2
Lewisburg PCH C624 Chipset
DDR4 ECC DIMM
16 (8 per CPU)
Integrated
AST2500
60 HDD / 8 SSD
12Gbps SAS / 6Gbps SATA
901TB using 14TB Ultrastar® HC530 drives
/ 61.44TB using Ultrastar® SS300 SSDs
Requirement
4U
812.8mm - 914.4mm / 32 in. - 36 in.
1360.7 kg. / 3000 lbs.
1020.5 kg. / 2250 lbs.
1. Overview
7
Advertisement
Table of Contents
