Table of Contents
Advertisement
Installation Guide
Step 7 : Open the drive boxes and verify their contents. Depending on the version of the Ultrastar
Serv60+8 being unpacked, four boxes should contain fourteen drive assemblies (in the form
of HDDs, SSDs, or blanks), one box should contain four drive assemblies, and one box should
contain eight SSD assemblies. Once the contents are verified, leave them in the boxes. This will
protect them from damage until they are installed in the enclosure.
Figure 14: Verify Drives and Drive Blanks
Caution: Do not lift the chassis by the system handles. The handles are designed
only for sliding the enclosure out of the rack on its rails.
4.2 Ultrastar Serv60+8 Unpacking Procedure
4. Packaging
43
Advertisement
Table of Contents
