Performance Specifications; Ultrastar Data102 Rack Requirements - Western Digital Ultrastar Data102 Installation Manual

Installation Guide
Specification
Vertical Rack Rail
1.6 Performance Specifications
Table 5: Performance Specifications
Number of Drive Slots
Data Transfer Rates
Max Raw Data Storage Capacity
1.7 Ultrastar Data102 Rack Requirements
The Ultrastar Data102 is designed to be installed into a rack that meets the EIA-310 standard at a minimum
1181-1197 mm (46.5in. - 47.13in.) of usable rack space, frame to frame . The vertical rack rails must be set
between 812.8 - 914.4 mm / 32 - 36 in. to support the enclosure. It requires 4U of rack space, and it should
be installed into the rack at the lowest possible U height to keep the load on the rack balanced.
Table 6: Required Rack Specifications
Parameter
Vertical Rack Rail Spacing
Static Load Rating
Dynamic Load Rating
Warning: When extended out of the rack on the rail system, the Ultrastar Data102 will be
~950 mm / 37.4in. extended outward. This may be a potential tipping hazard depending on
the configuration of the rack. Ensure that leveling feet, anti-tilt, and any other safety features
recommended by the specific rack manufacturers have been deployed before servicing.
The following section provides specific information necessary to install, service, and remove the Ultrastar
Data102 . The installation of the Ultrastar Data102 requires two people and a space of 1524mm / 60in.
in front of the installation space. The servicing of the enclosure requires one person and a minimum of
1219.2mm / 48in. of space in front of the installation space. The removal of the enclosure requires two
people, 1371mm / 54in. of space in front of the installation space, and 24in. on either side of the enclosure
for two people to remove the enclosure.
Non-Operational
Spacing
Specification
SAS Ports
Rack Depth 1181-1197 mm (46.5in. - 47.13in.) of usable rack space, frame to frame
450 mm (17.72 in.) minimum width, with 465 mm (18.31 in.) ±
Rack Width
1.5 mm nominal hole spacing. See EIA-310 Rack Standard.
Rack Units (U)

1.6 Performance Specifications

812.8 - 914.4 mm / 32 - 36 in.
Value
102
12Gbps SAS / 6Gbps SATA
2.0PB using 20TB Ultrastar® HC650 drives
12 x Mini-SAS HD (6 per IOM)
2 x 10/100/1G Ethernet
Requirement
4U
812.8 - 914.4 mm / 32 - 36 in.
1360.7 kg. / 3000 lbs.
1020.5 kg. / 2250 lbs.
1. Overview
Operational
6