9.4
CUTTING CYLINDER BEARINGS_____________________________________
The cutting cylinder bearings are self adjusting taper roller bearings and require no adjustments
9.5
REAR ROLL BEARINGS ____________________________________________
The roll bearings are self adjusting taper roller bearings and require no adjustment
9.6
CUTTING CYLINDER HEIGHT ADJUSTMENT ___________________________
TO ADJUST:
1.
Turn adjuster (A) at the rear of the unit clockwise to reduce
the height of cut, or anticlockwise to increase the height of cut
alternately. The grooves (B) are used as an rough indicator for
setting the roll parallel.
ADJUSTMENTS 9
en-97
A
B