Table of Contents
Advertisement
6.5.9 BRIGHTNESS _______________________________________________________
Using the PIN Menu Buttons 2 and 3 to arrow down to the bottom of the
list, and Button 4 to select Brightness, this gives you the option to change
from day to night mode.
The top line is used to alter the brightness in daytime mode. The middle
line is used to alter the brightness in night time mode. Bottom line is used
to set the threshold at which the screen automatically changes from day-
time to night time mode and vica-versa.
6.5.10 LANGUAGE MENU___________________________________________________
When you access the language selection page, the checkmark appears
next to the selected language.
When the checkmark is moved up and down, the language does not
change until Button 4 is used to select and store the language. At that
point the title bar changes to the new selected language.
The options will always be in the correct language.
English, Deutsch, Francais, Dansk, Svensk, Nederlands and Español.
6.5.11 BACKLAPPING _____________________________________________________
To enable backlapping,
1.Start the machine (6.3.4). Reduce Engine Speed to Minimum Low
Idle.
2.From the home screen, Navigate through screens: MAIN MENU >
SETTINGS > PIN.
3.Enter Pin "1001" and confirm with Button 4.
4.Scroll to Enable and select using Button 4. Text will change to Green
once selected.
5.Exit the menu's using Button 1 returning to Home Screen. The Cut-
ting Indication symbol will have changed to the Backlap symbol.
6.Lower Cutting units and Engage Cutters as normal. The Units will now
be rotating in reverse direction to allow backlapping operation. (See
Section 7.11)
7.The Backlap function will automatically default to Off for normal cutting operation when Ignition Key Switch is
turned off. Alternatively you can disable by stopping the Cutters using PTO Switch and repeating the steps 2
to 4 and selecting Backlap Disable.
CONTROLS 6
Brightness
100%
50%
814
Language
English
Nederlands
Deutsch
Español
Francais
Dansk
Svensk
Backlapping
Backlap Enable
Backlap Disable
en-47
Advertisement
Table of Contents
