4 SPECIFICATIONS
4.7
CUTTER UNIT SPECIFICATION _________________________________________
Construction
Blade Length
Number of Blades
Cylinder Diameter (New)
Minimum Cylinder Diameter
(Before Replacement)
Height of Cut
Height of Cut Adjustment
Rear Roll
Maximum Cylinder Speed at Maximum
Engine rpm
Transmission
4.8
CUTTING PERFORMANCE _____________________________________________
50 cuts per metre at 12km/hr with 8 knife cylinders.
37 cuts per metre at 12km/hr with 6 knife cylinders.
25 cuts per metre at 12km/hr with 4 knife cylinders.
3.78 hectares/hr.at 12km/hr. (9.3 acres/hr at 7.5 mph)
10% allowance is included for normal overlaps and turning at the end of each cut.
en-24
Magna 250
Heavy duty welded pressed steel construction
762mm
4 / 6 /8
254mm
235mm
12.7mm - 61mm
Adjustable screw system on rear roll
76mm Diameter
1250rpm ± 100
By direct drive through splined hydraulic motor